Alex is Sprintlaw's co-founder and a legal technology leader. He holds law and media degrees from the University of Sydney and has been recognized by Australasian Lawyer, Lawyers Weekly and the Sydney Young Entrepreneur Awards for his work building Sprintlaw and improving access to business legal support.
Maya runs a small digital agency. She wins an $18,000 website project, then brings in a specialist developer to build the booking system. The client deadline is tight, the client contract has strict confidentiality terms, and the developer wants to invoice as soon as the first build is done.
That setup can work beautifully, if the subcontract lines up with the main client contract. If it doesn't, you can end up stuck between two promises: one you made to your client, and one your subcontractor never agreed to follow.
A good subcontract agreement doesn't have to be complicated. It just needs to be clear about the work, deadlines, client rules, IP, confidentiality, risk and payment timing.
When Do You Need A Subcontract Agreement?
You need a subcontract agreement when your business hires another business to deliver part of the work you've promised to a client under a service agreement. This is different from a standard supplier agreement because the subcontractor's work sits inside your client project.
For example, you might use one if you run a:
- Marketing agency hiring a copywriter or paid ads specialist for a client campaign
- IT services consultancy bringing in a cybersecurity contractor for a systems audit
- Cleaning business using another cleaning company to cover a large commercial site
- Event business hiring an AV provider to deliver part of a client event
- Professional services firm engaging a specialist consultant under a consulting agreement for a client deliverable
The main reason to have it in writing is control. Your client will usually hold your business responsible for the whole project, even if someone else does part of the work.
Without a written subcontract, you may struggle to prove what the subcontractor agreed to do, when it was due, who owns the work product, or whether they were allowed to contact your client directly.
Most service subcontract agreements are governed mainly by state contract law. Federal laws can still matter, especially for copyright ownership, trademarks, trade secrets, privacy and advertising claims. If your project is heavily regulated or crosses several states, get tailored advice before you sign.
How Do You Make The Subcontract Match Your Head Contract?
You make the subcontract match your head contract by identifying the client obligations that the subcontractor needs to follow, then flowing those obligations down into the subcontract. This is often the most missed step.
Your head contract is the agreement between your business and your client. Your subcontract is the agreement between your business and the subcontractor. The subcontractor isn't usually a party to the head contract, so they aren't automatically bound by it.
Flow down terms are the bridge. They pass the relevant client requirements through to the subcontractor.
Common Flow Down Obligations
- Deadlines: If your client deliverable is due on May 1, your subcontractor's work should be due earlier so you have time to review it.
- Confidentiality: If your client requires strict handling of business information, your subcontractor should accept matching confidentiality rules.
- IP ownership: If your client will own the final deliverables, you need rights from the subcontractor that allow you to transfer or license those deliverables to the client.
- Data security: If the project involves personal data, the subcontractor should follow the privacy and security standards you promised the client.
- Client policies: If your client has site rules, brand rules or security procedures, include the ones that apply to the subcontractor's work.
- Audit and records: If the client can ask for project records, your subcontractor may need to keep the right records too.
Don't just attach the head contract and hope for the best. Some parts may be confidential or irrelevant. A cleaner approach is to list the obligations that apply, or attach a carefully selected schedule of client requirements.
What Should A Subcontractor Contract Template Include?
A subcontractor contract template should include the key commercial terms, the flow down client obligations and the legal protections your business needs if something goes wrong. A template is a starting point, not a finished document.
Here is a practical fill in outline you can use when preparing instructions for your agreement:
- Parties: Write the legal names of your business and the subcontractor, not just trading names.
- Background: Briefly describe the client project and the subcontractor's role in it.
- Scope of work: List exactly what the subcontractor will deliver, including exclusions.
- Milestones and deadlines: Set dates for drafts, reviews, revisions and final delivery.
- Standards: State the quality, professional, technical or client standards the work must meet.
- Flow down obligations: Include the client terms the subcontractor must follow.
- Confidentiality: Cover client information, your business information and project materials.
- IP ownership and licenses: State who owns new work, pre existing materials and final deliverables.
- Client contact: Say whether the subcontractor can communicate directly with the client.
- Payment: Set fees, invoicing rules, payment timing and what happens if the client delays payment.
- Insurance and risk: Include insurance evidence, indemnities, liability caps and exclusions where appropriate.
- Termination: Explain when you can end the arrangement and what happens to work in progress.
- Records and handover: Require files, passwords, source materials and project notes to be handed over.
A lawyer should tailor this before you use it. Templates often miss the parts specific to your deal, especially IP transfer language, client confidentiality rules and payment timing that depends on the head contract.
How Should Payment, Insurance And Liability Work?
Payment, insurance and liability should work in a way that reflects the risk your business has taken on under the client contract. If the client can reject late or defective work, your subcontract should give you practical remedies against the subcontractor.
Payment Timing
Be clear about when the subcontractor can invoice. You might choose payment on milestones, payment after your acceptance, or payment after the client pays you.
Be careful with pay when paid wording. State law and industry rules can affect whether those clauses work as intended, especially in certain project types. If you use them, have an attorney check the wording.
For example, Maya's client pays $18,000 net 30 after final acceptance. Her developer charges $6,000. Maya sets the developer's first draft deadline for April 20, final handover for April 24, and payment 5 business days after Maya accepts the finished booking system. That gives Maya time to review the work before the client deadline on April 30 and avoids paying for unfinished work.
Insurance And Risk Allocation
Your subcontract can require the subcontractor to hold insurance that fits the work, such as general liability, professional liability or cyber coverage. The right type depends on the services, client requirements and project risk.
Liability clauses usually deal with:
- Who pays if the subcontractor breaches confidentiality
- Who is responsible for IP infringement claims
- Whether liability is capped at a set amount
- Whether certain losses are excluded
- Whether the subcontractor indemnifies you for specific claims
Don't copy these clauses blindly. A very low cap may leave you exposed under the head contract. An unlimited indemnity may be unrealistic for the subcontractor and hard to negotiate.
How Do IP, Confidentiality And Client Data Work?
IP, confidentiality and client data should be handled so your business can deliver what it promised to the client without accidentally losing rights or exposing sensitive information. These clauses are especially important in service projects.
Under the US Copyright Act, the person or business that creates copyright material often owns it unless there's a written assignment or a valid work for hire agreement. For many subcontracted service deliverables, you shouldn't assume your business owns the work automatically.
Your subcontract should say whether:
- The subcontractor assigns new project IP to your business
- The subcontractor keeps ownership but gives your business a broad license
- Pre existing tools, templates or code remain with the subcontractor
- Your business can pass the required rights to the client
- The subcontractor can reuse portfolio pieces, case studies or anonymized materials
If the subcontractor uses your client's name, logo or brand assets, the Lanham Act and trademark rules can become relevant. The subcontract should limit brand use to the project and require approval before anything is published.
For confidential information, the Defend Trade Secrets Act can help protect trade secrets at a federal level, but contracts still matter. Your agreement should define confidential information, restrict use, require secure handling and set out what must be returned or deleted at the end of the project. For individual contractors or consultants, confidentiality and trade secret clauses should also include the DTSA whistleblower immunity notice, or cross reference a policy that provides it, so you don't lose access to certain DTSA remedies.
If the subcontractor handles personal information, add privacy and security obligations that match your client contract and applicable privacy laws. State privacy laws can change the details, so get advice if sensitive or high volume data is involved.
What Should You Do If The Subcontractor Misses A Deadline?
If the subcontractor misses a deadline, act quickly and keep a clear record before the delay affects your client. Your first goal is to protect the client relationship while preserving your rights under the subcontract.
Work through it in this order:
- Check the subcontract: Confirm the exact deadline, deliverable, notice process and any cure period.
- Record the issue: Save emails, messages, draft files, meeting notes and missed milestone evidence.
- Ask for a recovery plan: Get a revised delivery date, what will be delivered and who is responsible for each step.
- Protect the client project: Decide whether you need extra resources, partial delivery or a workaround.
- Send a formal notice if needed: Follow the notice clause and state what breach needs to be fixed.
- Review payment: Check whether you can withhold, reduce or defer payment for incomplete work.
- Get help before terminating: Termination can affect your client obligations, IP rights and access to project materials.
If the subcontract includes clear milestone dates and handover obligations, this process is much easier. If it doesn't, you may still have rights under general contract principles, but the path can be less certain.
If the delay affects consumer facing advertising, claims or promotions, the FTC Act and FTC guidance may also matter. For example, a marketing subcontractor shouldn't make claims your business can't verify just to catch up on a campaign deadline.
Frequently Asked Questions
Can I Use A Free Subcontract Agreement Template?
Yes, you can use a free template as a starting point, but it may not match your head contract or your project risk. An online fixed fee service can be more tailored and predictable, while a traditional firm may bill by the hour for drafting and negotiation.
Can My Subcontractor Talk Directly To My Client?
Yes, if you allow it, but set boundaries in writing. Your agreement should say whether direct contact is allowed, who approves decisions, and whether the subcontractor can pitch future work to the client.
What If The Subcontractor Uses Their Own Tools Or Templates?
That can be fine, but the agreement should separate pre existing materials from new project deliverables. You need enough rights to use, modify and pass on the final work to your client.
Does The UCC Apply To A Service Subcontract?
Usually not if the contract is mainly for services. The Uniform Commercial Code is more likely to matter when goods are a significant part of the deal, so mixed goods and services projects should be checked carefully.
Key Takeaways
- A subcontract agreement helps you control the work another business performs inside your client project.
- Flow down obligations are the key to making the subcontract match your head contract.
- Your scope, deadlines, acceptance process and client contact rules should be specific.
- IP and confidentiality clauses need careful drafting, especially under the Copyright Act and trade secrets rules.
- Payment timing, insurance, indemnities and liability caps should reflect the risk you accepted from your client.
- If a deadline slips, keep records, follow the notice process and protect the client project first.
If you'd like help with subcontract agreement terms, flow down obligations, IP ownership, confidentiality and trade secret clauses, DTSA notice wording and payment timing, you can reach our team at (888) 449-8437 or team@sprintlaw.com. Where legal services are required, they're provided by licensed US lawyers at ElevateNext US, LLC, a trusted US law firm, through the Sprintlaw platform.








